Cap 2000 Viscometer Manual Link -

Ensure the spindle is securely fastened to the coupling.

The official AMETEK Brookfield CAP 2000+ Viscometer Operations Manual

Place a small amount of sample (< 1 mL) onto the center of the plate. Step 4: Run Measurement

Ensure the foam insert is removed, or the motor may experience errors. cap 2000 viscometer manual link

: Engineered for advanced thermal applications spanning 50°C to 235°C. Unboxing and Laboratory Benchtop Setup

The CAP 2000+ is built for tests that require variable speeds and quick heating or cooling.

Lower the handle to place the sample on the plate, ensuring no air bubbles are trapped. Do not force the cone onto the plate. Ensure the spindle is securely fastened to the coupling

The manual strongly advises that the . If you switch between different spindles (e.g., CAP-01 vs. CAP-10), you must recalibrate the geometry for that specific spindle to maintain accuracy.

Using the adjustable feet and the integrated bubble level to ensure the cone sits perfectly perpendicular to the plate.

Equipped with a parallel printer port and an RS-232 PC interface for automated data logging using CAPCALC software. 🧪 Standard Operating Procedure (SOP) Unboxing and Laboratory Benchtop Setup The CAP 2000+

Set the viscometer on a clean, level bench surface.

Integrated temperature control available in two ranges: 5°C to 75°C or 50°C to 235°C.

: The instrument features integrated temperature control (Peltier Plate), ranging from 5°C to 75°C (L Series) or 50°C to 235°C (H Series). Speed Range : You can set rotational speeds from 5 to 1,000 RPM in 1 RPM increments, allowing for variable shear rates. Sample Volume : This series is designed for small sample sizes, typically less than 1 mL Never lift the viscometer by the handle or head