Qidi X-pro Manual -

The QIDI X-Pro network card only supports 2.4GHz Wi-Fi networks . Ensure your router is broadcasting a dedicated 2.4GHz band and that your password does not contain special characters, which can confuse the printer's firmware.

typically comes with two extruders pre-installed. Ensure they are seated properly and plugged in.

If settings get corrupted, the manual doesn't mention this: Create a G-code file with M502 (factory reset) and M500 (save). Run it via SD card.

*Note: The QIDI X-Pro is a bed-slinger (moves front to back qidi x-pro manual

The is a dual-extruder FDM 3D printer designed to balance affordability with advanced features. Manufactured by QIDI Tech, a Chinese company known for cost-effective 3D printing systems, the X-Pro is an improved version of the QIDI Tech 1 and shares a design lineage with the popular MakerBot Replicator.

A unique feature of the X-Pro is the actively heated chamber (up to 60°C). The manual explains:

Power‑loss recovery cannot re‑home the Z axis; it trusts the previously stored Z value. Any minor backlash or thermal contraction will cause a small discontinuity. For important prints, it is better to restart the print than rely on recovery. The QIDI X-Pro network card only supports 2

QIDI Tech X-Pro 3D printer Review: Specs, Software, Upgrades and More

If you encounter persistent clogs or the nozzle is worn from abrasive filaments (carbon fiber, glow‑in‑the‑dark), replace the 0.4 mm brass or hardened steel nozzle. Ensure the hotend is heated to at least 200 °C before attempting to unscrew the old nozzle to avoid damaging the threads.

The X-Pro supports dual-color printing, meaning you can load two different filaments. Select Tools > Filament > Load . Select Left or Right extruder. Ensure they are seated properly and plugged in

If you recently unboxed a , you’re likely staring at a machine that promises high-speed, dual-extrusion printing. But whether you are a beginner or a seasoned maker, navigating the setup and maintenance of a dual-extruder printer can be tricky without the right roadmap.

The company promises a reply within 12 hours; if they fail to do so, they will send two free nozzles and two build‑plate stickers as compensation.