Eberle Instat 6 User Manual English !!link!! Access

Enter programming mode by holding the button for 3 seconds.

Keep your home at a constant, lower temperature while you are away to save energy and protect pipes from freezing.

Verify that a flame or heat icon is displayed on the LCD. Raise the temperature target well above the room reading to test the connection. If the icon displays but the boiler remains idle, check the physical terminal wiring or your boiler's primary power switch. Controls Are Unresponsive (Lock Symbol Displayed): Cause: The child lock/keypad lock is active. eberle instat 6 user manual english

Verify target temperature is higher than room temp; check Terminal 1 and 2 wiring. Sensor fault or internal calibration error.

The INSTAT 6 comes in different models, primarily: Enter programming mode by holding the button for 3 seconds

: Switch to Manual Mode via the mode selector to hold a single temperature indefinitely. Installation & Maintenance

Once wired and powered, the thermostat may need several days to "learn" the room's thermal data to optimize the self-learning heating curve. User Programming and Operation Raise the temperature target well above the room

Used to increase or decrease temperatures and navigate settings. Prog Button: Accesses programming modes. Mode Button: Toggles between Auto, Manual, and Off modes. Day Button: Sets the day of the week. 4.1 Display Indicators Clock Icon: Indicates time and program segments. Thermometer Icon: Current temperature. Flame Icon: Indicates heating is active. 5. Programming the Instat 6

Choose a suitable position approximately 1.5 meters above floor level. Avoid positioning the unit in direct sunlight, near drafts (doors/windows), or close to heat sources (radiators/appliances).