Parameter | Description |
|---|---|
Name | Name of the unit. |
Description | Description of the unit. |
Template name | Name of the unit type template |
Template version | Version of the unit type template |
Timeout between keystrokes | Max time between keystrokes before terminal goes back to default state (seconds). |
LCD refresh time | Timeout between automatic refresh of information in the KT LCD (seconds). Set to 0 to not refresh at all. |
24 Hour clock | If this check box is checked, the time should be displayed with a 24 hour clock. If it is not checked, it should be displayed with a 12 hour clock. |
Min time between call next | Defines the time that must elapse between two call next on a Service Point for a specific user (seconds). |
If the system boots up in Chinese, navigate to the parameters menu (usually parameter #0 or #1) to toggle the language back to English.
Refines acceleration and deceleration algorithms to reduce machine jarring during high-speed directional changes. Prerequisites: Preparing for the Update
: The drive must be formatted to FAT32 . The controller cannot read NTFS or exFAT partition styles.
folder during its boot sequence and begin the update automatically. Verify Update ddcs v3 1 firmware update
Take clear photographs or manually record every single line item configuration. Step-by-Step Firmware Update Procedure
Insert the prepared USB flash drive into the controller’s USB port.
Updating the firmware involves a simple offline process using a USB flash drive: ddcs v3.1 firmware update - NVCNC If the system boots up in Chinese, navigate
Although detailed release notes are scarce, the following improvements have been observed in newer firmware builds:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Move file to root directory. Ensure the file name matches manufacturer specs exactly. Unrecognized USB drive format or size. The controller cannot read NTFS or exFAT partition styles
Delete all other files from your thumb drive.
Insert the prepared USB flash drive into the controller's USB port.
Have you updated to V3.1 yet? Did you notice a difference in your machine's performance? Let us know in the comments below!
Key specifications include:
While continuing to hold the Start button, turn on the power supply to the controller.
Parameter | Description |
|---|---|
Default name | Default name of the unit. |
Description | Description of the unit. |
Number of units (max 127) | Enter the number of units to create when publishing this unit to a configuration. |
Unit Identifiers | A table with unit identifiers, which is dependant on which Number of units you have entered in the field above. So, if the number 4, for example is entered, the table will automatically get 4 rows. The two columns of the table are: • Name - Name of the unit, by default the name of the unit plus a sequential number, for example WebReception 5 or WebServicePoint 2. Can be changed to anything, so long as the name is unique, within the Branch. • Logic Id - An ID used in the connectors. The Logic Id continues with the next number in the sequence of the auto generated ID's within the unit type (e.g. Service Points, Entry Points, or Presentation Points). The number can be changed to anything, in the range of 1-9999, as long as it is unique within the Service Point, Entry Point, or Presentation Point. Example: If you have a total of 4 units and let the first three keep the automatically set Logic Id’s 1-3, then manually set the fourth unit to Logic Id 12, then change the Number of units to 5, the fifth unit will automatically get Logic Id 4. |
Unit id | Identification code of the unit. |
ID Code | ID code. Valid values between 1-125. |
Media Application | Name of the Media Application Surface that is used. |
Device Controller | Name of Device Controller that is used. |