Gunnebo Speedstile Fl Installation Manual New! -

Loosen anchor bolts, re-shim under baseplates using a spirit level, and re-torque.

Check the tightness of the glass wing clamp bolts. Verify the functionality of the fire alarm override interface.

: For multiple lanes, identify Master and Slave pedestals. The Master unit typically contains the LCM02 board and a circuit breaker above the transformer. gunnebo speedstile fl installation manual

💡 Factory reset code: Hold the service button for 10 seconds while powering up . Use sparingly, like a swear word.

The installation requires precise site preparation, specialized electrical wiring, and the configuration of programmable relays to ensure secure pedestrian access control. 1. Site Preparation & Mounting Loosen anchor bolts, re-shim under baseplates using a

Cable conduits must run at least 140mm below the finished floor and rise at least 50mm from the foundation level. 2. Electrical Requirements

Technicians should mark a precise chalk line on the floor for the longitudinal alignment of the units. Positioning: : For multiple lanes, identify Master and Slave pedestals

The concrete floor must be perfectly level, flat, and structurally sound.

This section synthesizes the core mechanical and electrical procedures found within the .