Start Guide Better - Xnx Universal Transmitter Quick

This is a condensed guide. Always refer to the official Honeywell Xnx Technical Manual for detailed safety instructions, hazardous area classifications, and advanced configuration options.

Only qualified personnel trained in industrial gas detection and local electrical codes should perform these procedures. 1. Mechanical Installation and Mounting

Swipe the magnetic wand over for 3 seconds to access the main menu. Enter the security passcode (default is 0000 ). Navigate to General Settings > Sensor Type .

: Use shielded twisted-pair cable for distances up to 50 feet. 4. First-Time Power Up Xnx Universal Transmitter Quick Start Guide

Ensure the enclosure is properly connected to a verified earth ground to prevent RF interference and electrical hazards.

The analog signal can be configured as Source, Sink, or Isolated. Adjust the onboard physical hardware switches to match your controller topology: : 4-24mA Loop Signal Output. Ensure loop resistance does not exceed 500 ohms at 24V DC. Optional Relay and Digital Connections

Monitor the real-time values on the display. Once the readings level off and remain stable, swipe to save the span setting. This is a condensed guide

The Honeywell XNX Universal Transmitter Quick Start Guide (QSG) is a condensed manual designed for the quick installation and commissioning of the device in hazardous areas. ⚠️ Essential Safety Warnings

For further details, refer to the complete user manual provided in the packaging or visit the manufacturer's website.

The Xnx housing is rated NEMA 4X / IP66. Use the two side mounting flanges to attach the unit to a rigid pole, wall bracket, or unistrut. Ensure the sensor port points downward (to prevent moisture ingress). Torque mounting bolts to 15 in-lbs. Navigate to General Settings > Sensor Type

The is a powerful tool for monitoring industrial processes. By following this quick start guide, users can set up and operate the device effectively, ensuring reliable performance in their applications.

The XNX transmitter features five conduit entries (available in M25 or 3/4” NPT variations) and can be mounted directly onto a wall, pipe, or ceiling. Mounting Options