Ats-20 Radio Manual Instant

Access the menu via the button and select "EEPROM RESET" to factory default the settings.

Used for voice communications on higher amateur bands (e.g., 20 meters and up).

Ensure the antenna is long enough; a 20-meter wire is recommended for effective Shortwave reception.

Press to save setting, then B to exit.

Then she remembered— the manual was tucked in the go-bag . A thin, folded booklet she’d never opened.

Fully extend the telescopic antenna for shortwave (SW) and FM. For AM/MW reception, the radio relies heavily on its internal ferrite bar, so rotating the physical body of the radio can drastically improve the signal.

| Control | Function | |---------|----------| | | Power & volume (rotate) | | Tuning Knob | Change frequency / navigate menu | | Band Button (B) | Cycle: FM → SW → MW → LW | | Mode Button (M) | Switch tuning steps (fine/coarse) | | Memory/Set Button (S) | Save/recall presets (long press to save) | | Light/Display Button | Backlight on/off (hold for menu) | ats-20 radio manual

When in SSB mode, the BFO allows you to fine-tune the pitch of the voice to make it intelligible. Rotate the encoder until the "Donald Duck" sound turns into a clear human voice. 6. Menu Settings

Short press to enter volume mode (use encoder to adjust). STEP: Adjust tuning steps (

Connects external headphones or stereo speakers. 3. Step-by-Step Operation Guide Powering On and Off Access the menu via the button and select

: A detailed ATS-25 User Manual (PDF) is often cited by users as the best reference for shared software features.

The stock telescopic antenna is short for low frequencies. Connect a long wire antenna to the BNC terminal for improved SW and MW reception. Screen is Blank but Sound is Audible

The ATS-20 is known for its compact aluminum case and high-contrast screen. Press to save setting, then B to exit

Electronics like routers, LED bulbs, and PC monitors cause heavy RF noise. Move near a window.