The program will guide you through the process. Ensure you follow all instructions carefully.
Find this option under the "Maintenance" section.
A: This is the "Hot" issue. Epson recently pushed firmware updates (FW 1.1.2) that block older adjustment program hacks. You may need to downgrade your firmware first—a complex and dangerous process.
This function allows you to write the initial configuration values to the EEPROM. It's typically used after a main board replacement to input the printer's specific serial number and MAC address, ensuring the new board is recognized as the correct device. epson l6490 adjustment program hot
The printer must be connected to a PC via a USB cable ; wireless connections are often unstable for these operations.
The Adjustment Program, sometimes called a or WIC Utility (Waste Ink Counter Utility), is a software tool created by Epson for service technicians. It allows authorized users to perform specialized maintenance tasks that are not available in the standard user driver software. Key functions include:
Using the Adjustment Program involves a few key steps. Note that you will need a Windows computer to run this program. 1. Preparation The program will guide you through the process
For the L6490 specifically, the program allows you to:
Advanced high-volume print shops often redirect the internal ink purge tube out through the back casing into an external plastic bottle, removing the need for physical pad replacements forever.
The program will prompt you to turn off your Epson L6490. Restart the Program: Restart the computer and printer. Important Warnings and Precautions A: This is the "Hot" issue
: Once the counter hits 100%, the printer locks itself down to prevent waste ink from overflowing onto your desk.
The is a powerhouse multifunction printer designed for high-volume office printing. However, like all inkjet printers, it relies on a waste ink pad system to collect excess ink during cleaning cycles and borderless printing. When these pads become full, the printer stops working, displaying a " Service Required " message (usually indicated by blinking lights).
Unlike Epson workforce models that use a user-replaceable external waste tank, the L6490's waste pads are internal. Replacing them requires disassembling the printer. The Adjustment Program bypasses the need to physically replace the pads (though it is not recommended).
: The printer's control panel displays "A printer's ink pad is at the end of its service life". It will refuse to process any print, scan, or copy command until it is reset. Core Functions of the Adjustment Program