Actia Psa Xs Evolution Drivers !new! Link

Many users run Diagbox via a Windows 7 Virtual Machine (VMware or VirtualBox) on modern Mac or Windows laptops. If the guest OS doesn't see the interface, you must manually pass the USB device through. In VMware, look at the top menu bar under > Removable Devices > Actia USB Device > Connect (Disconnect from Host) . Conclusion

For users starting from scratch, here is a comprehensive installation workflow based on established community guides:

The Actia PSA XS Evolution is a essential diagnostic interface for Peugeot, Citroën, DS, and Vauxhall vehicles. Drivers for this hardware, typically referred to as the VCI (Vehicle Communication Interface), allow diagnostic software like DiagBox to communicate with the vehicle's electronic control units (ECUs). Driver Availability and Compatibility

Symptom 3: Interface Disconnects Randomly During Diagnostics actia psa xs evolution drivers

This often happens on 64-bit systems. Make sure you are using drivers compatible with 64-bit architecture.

These work best with older versions of Diagbox (v7.xx) and Windows 7/XP.

If it returns an "Init KO" or communication error, the drivers are failing to communicate with the hardware chip. Troubleshooting Common Driver Errors Error: "Device Not Recognized" / Code 43 Many users run Diagbox via a Windows 7

If you are stuck on a specific error code or need help finding the files, tell me you are running and your Windows operating system version so I can provide a specific solution. Share public link

Drivers for the interface are typically bundled with the diagnostic software rather than installed as standalone files.

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ PSA XS Evo driver help | Peugeot Forums Conclusion For users starting from scratch, here is

Follow this sequence exactly. Skipping steps is the #1 cause of "driver failed" errors.

If you are using DiagBox, the drivers might already be included in the installation files.

: Windows should attempt to detect the device. If it fails, open Device Manager and look for a "USB-to-CAN" or "ACTIA" entry with a yellow exclamation mark.

For drivers, the most reliable and direct source is the official ACTIA IME Support page , which provides the latest "Level X" driver packages for current Windows versions. Official Driver Downloads