Lenel Lnl-3300-m5 Installation Manual Upd High Quality

Lenel LNL-3300-M5 is an Intelligent System Controller designed specifically for migrating legacy CASI-RUSCO M5 and M3000 hardware to the

Blinks in a rhythmic pattern indicating healthy firmware execution.

: Disconnect field wiring from the legacy CPU and Power/Comm boards .

Note on Legacy Boards: Legacy CASI M-Series boards be mixed with standard Lenel M-Series boards. If you are converting a legacy M5 or M3000 controller to the Lenel M-Series, all boards on that specific controller backplane must be converted. Upgrading Legacy Systems Many facilities utilize the LNL-3300-M5

The installation process typically follows a "one-for-one" migration strategy: Hitron Bina Teknolojileri Power Down : Safely shut down the legacy controller. Disconnect Wiring : Unplug all field wiring from the legacy CASI boards. Hardware Swap : Remove the old boards and insert the new LNL-3300-M5 into the backplane Lenel Lnl-3300-m5 Installation Manual UPD

: Turn off the power to the legacy CASI controller .

Connect a dedicated, battery-backed 12 VDC power source to the J1 terminal block. +12 VDC (Positive) Pin 2: GND (Negative/Ground) Downstream Communication (Port 2 - RS-485)

Connect to the negative downstream communication line.

The is an Intelligent System Controller (ISC) designed as a "plug compatible" replacement for legacy CASI M5 and M3000 CPU boards . Its installation is primarily part of a migration process to the OnGuard security management system . Core Installation Steps If you are converting a legacy M5 or

onto the . Unlike its predecessor, this new CPU wasn't just a basic brain; it was an OnGuard-ready powerhouse with a local database capable of making real-time access decisions even if the network went down. Step 3: The Digital Handshake

Secure the board using the provided non-conductive nylon standoffs and screws to prevent electrical shorts against the backplane. Step 2: Power and Grounding Connections

Statically set your laptop to 192.168.0.250 with a subnet mask of 255.255.255.0 .

Connect the controller to your facility's production Local Area Network (LAN). Integrating Downstream Devices & Communication LNL-3300-M5 Hardware Swap : Remove the old boards and

The designed to seamlessly migrate legacy CASI M5 or M3000 systems directly over to the Lenel OnGuard platform. It replaces legacy E, P, PX, PXN, and PXNplus CPUs, as well as the legacy CASI power/comm boards.

This installation guide covers technical specifications, mounting steps, wiring configurations, and initial provisioning for the LNL-3300-M5 board. Technical Specifications and Requirements

The LNL-3300-M5 has two dedicated inputs on TB1 for security monitoring:

The is not just a set of instructions—it is a safety and compliance document. Using the correct revision ensures your access control system passes fire alarm integration tests, meets UL 294 ratings, and avoids ground loops that could fry the board.

Open a web browser on a laptop configured to the same subnet and enter the controller's IP address.