, covering both older RS-232 methods and USB methods, along with troubleshooting tips. Why Should You Upgrade the Satlink WS-6906
Check your COM port settings in Device Manager. Ensure the driver for your USB-to-Serial adapter is properly installed. Turn the Satlink off and back on right after pressing "Start".
Adds new satellite frequencies (TP) and deletes inactive ones.
Click once the software detects a successful connection (e.g., "succeed connecting com1").
To upgrade the software on a , you typically use a PC connection via the RS-232 port rather than a USB drive, which is common in newer models. Software Upgrade Process
Some newer hardware versions may support USB flash drive updates: Copy the firmware file to the root directory of a formatted USB drive Connect the drive to the WS-6906 USB port. Navigate to the satlink ws6906 software upgrade
The WS-6906 typically uses a 3-pin connector to serial/USB.
Windows will not "detect" the device when you first plug it in. You must start the software, click "Next," and then power on the WS6906 for the updater to see it.
Select the matching COM port number found in Device Manager. Bits per second (Baud Rate): 115200 Parity: Even Data Bits: 8 Stop Bits: 1 Operate Mode: Upgrade Step 4: Load the Firmware File
While the Satlink WS-6906 is strictly a DVB-S (Standard Definition) meter and cannot lock onto newer DVB-S2 (HD/4K) signals, updating its software offers several distinct advantages:
: A PC with an RS-232 serial port or a high-quality RS-232 to USB adapter. , covering both older RS-232 methods and USB
: If possible, use the "Read parameters" function in the tool to save your current configuration to your computer before applying any updates. Satlink WS-6906 Software Upgrade Guide | PDF - Scribd
This comprehensive guide covers everything you need to safely upgrade your Satlink WS6906 software. Prerequisites: What You Need Before Upgrading
Here’s a useful, step-by-step guide for upgrading the software (firmware) on your satellite meter.
: In the software, select the correct COM port. Click "Confirm" or "Next" . Load Firmware : Click the "Browser" or "Load Software" button and select your extracted .bin update file.
Newer firmware versions often resolve issues like screen flickering, battery indicator inaccuracies, or sudden freezes. Turn the Satlink off and back on right
Double-check the 3-pin cable connection. The timing of turning the meter off and on is crucial.
Never pull the cable or turn off the meter while the upgrade progress bar is running. Required Tools and Files
The computer screen should immediately change to show a progress bar indicating data transmission. Step 6: Wait for Burn Completion The process occurs in two distinct phases:
: The software should now detect the device. Click "Load Software" or "Next" to start the transfer.