Touch User Manual | Smartpack2

The Eltek Smartpack2 Touch controller is a premium control unit designed for managing industrial DC power systems. Featuring an intuitive touchscreen interface, it provides comprehensive monitoring, advanced battery management, and flexible system configuration.

The currently running on your Smartpack2 Touch Your nominal system voltage (24V, 48V, or 110V)

Navigate to to define your trip points:

Icons here let you switch between modes: smartpack2 touch user manual

Settings for voltage limits, battery types, and alarm thresholds.

The Smartpack2 Touch features an integrated web server that mirrors the controller's physical interface for off-site technicians.

Navigate to Main Menu > Installation > Network Settings to configure a static IP address or enable DHCP for remote access. 3. Configuration and System Settings The Eltek Smartpack2 Touch controller is a premium

Regular maintenance keeps the controller secure and running efficiently. Backing Up Configuration Files

⚡

To change values, you must authenticate using the appropriate PIN code. The standard technician factory default code is , though this should be updated immediately during deployment to secure the system. Parameter Group Typical Default Settings Adjustment Path Float Voltage 53.5V (for 48V Nominal Systems) Menu > Battery > Voltages Boost Voltage Menu > Battery > Voltages Low Voltage Disconnect (LVD) Menu > Distribution > LVD Current Limits 0.1C to 0.2C of Battery Capacity Menu > Battery > Current Limit Battery Management Setup The Smartpack2 Touch features an integrated web server

The primary interface for local configuration.

Set tests to run automatically every 30, 90, or 180 days.