Once you have downloaded and installed the software, follow these steps to secure your HMI data:
Go to the official Siemens support website ( ://siemens.com ).
+------------------+ Ethernet / USB +-------------------+ | Engineering PC | <====================> | SIMATIC HMI Panel| | (ProSave V10) | | (Transfer Mode) | +------------------+ +-------------------+ Step 1: Prepare the HMI Panel Power on the HMI terminal. simatic prosave v10 download link
Connect your PC to the HMI panel using the appropriate physical medium—ideally a standard Ethernet patch cable. Ensure that your PC’s network interface card (NIC) is configured to sit on the exact same IP subnet as the HMI panel. Step 2: Configure the HMI Device
Yes, absolutely. ProSave is provided by Siemens as a freeware service tool and does not require a license. Once you have downloaded and installed the software,
Capture the exact state of an HMI—including system settings, project files, and recipe data—into a secure image file on your PC (often saved with a .psb extension). If a panel fails, you can restore this image onto the replacement hardware in a matter of minutes.
While the primary download source should always be the official Siemens portal, here is a community resource that specifically discusses ProSave V10: Ensure that your PC’s network interface card (NIC)
If an HMI crashes on the factory floor, a clean, lightweight installation of ProSave on any standard laptop can get the machine back online quickly.