Note: If your device uses the usbtv007 chipset, ensure you select the driver explicitly supporting that identification. 3. Installation Guide (Windows 10/11/8/7)
Unzip the downloaded folder to a known location on your computer. Connect Hardware: into a USB 2.0 port Update via Device Manager: Device Manager (right-click the Start button and select it) Look for an entry like " SM-USB 007 ," "SMI Grabber Device," or "Unknown Device" Right-click the device and select Update driver Browse my computer for drivers and point it to the folder you extracted. Verify Installation:
Ensure the video source (yellow RCA plug) is firmly connected. If the driver is installed, check that the "Video Input" is set to "Composite" or "S-Video" in your capture software. usb dvr capture dc60 008 version 4.0a download
In your Windows Sound Control Panel, ensure the USB audio interface properties are set to 48,000 Hz or 44,100 Hz to match your video software recording settings.
By following these steps and tips, you should be able to successfully download and install the USB DVR capture DC60 008 version 4.0A firmware. Note: If your device uses the usbtv007 chipset,
Free, open-source, and highly recommended. Add a "Video Capture Device" source to capture your DC60 feed.
Disclaimer: Some drivers found online are shared by third parties. Always scan downloaded files with antivirus software. Connect Hardware: into a USB 2
Forums like and Reddit r/videocapture have pinned posts with verified, clean driver files. Users often upload the exact "Version 4.0a" driver package to file hosts like MediaFire or Google Drive. Always scan any download with Windows Defender or VirusTotal before installing.
Commonly found in newer clone variants, often recognized natively as a USB Web Camera. Where to Safely Download the Driver
If a yellow triangle appears, right-click the device, choose , and point it to the driver folder you extracted earlier. 4. Software for Recording