Hitarget V30 Plus | Manual |verified|

Configure Channel and Protocol (e.g., Transparent, 450-470MHz). Set Output Power. 5.3 Configuring as a Rover Set Link Type to Internal UHF .

Set the to Internal UHF (or External Radio if using a high-power external transmitter).

"By default, the V30 Plus operates in 'Ambient Mode.' This means 92% of perceived reality is automatically filtered for coherence. To access the 'Raw Feed,' press the indentation behind your left ear. If no indentation exists, the unit has already been activated."

Match the , Frequency , and Protocol exactly to the settings configured on your Base station. hitarget v30 plus manual

to set target height and coordinates. If no known point exists, use the "Setting by Average" option. 3. Network and CORS Connection To establish a network connection for RTK: Server Details:

The Hi-Target V30 Plus is a dual-frequency GNSS RTK system that serves as the backbone for modern surveying tasks—from topographic and cadastral mapping to road alignment, railway projects, bridge construction, and water conservancy works. It delivers centimeter-level positioning accuracy by tracking signals from multiple satellite constellations (GPS, GLONASS, BeiDou, Galileo, QZSS, and SBAS).

Power-On Long press the button for 1 second. ... the first voice of the speaker Dingdong, release the button to normal shutdown. . V30 Plus GNSS RTK System User Manual Configure Channel and Protocol (e

to configure advanced receiver features, manage static data, or apply firmware upgrades. 🛰️ Step 2: Configuring Key Built-In Features

Simultaneous tracking of GPS, GLONASS, BDS, GALILEO, and SBAS. Accuracy:

Never power on the system in Base mode with internal radio active if the UHF antenna is missing; this can permanently burn out the internal radio board. Set the to Internal UHF (or External Radio

Inside Hi-Survey Road, navigate to the tab and select Connect .

is renowned for its durability and advanced technical capabilities.