Finally got my hands on the XMTK-9000. If you’re looking for the official user manual (setup, calibration, error codes, maintenance schedules), here’s what I found:
Under the normal PV/SV display mode, press the key. The SV display will begin to flash. Press the "<" key to shift between digits, and ∧logical and or ∨logical or keys to change values. Press "SET" again to return to the normal operation mode. 3.2 Advanced Parameter Setting (PID and Alarms) To enter the parameter setting menu:
The front panel consists of the PV display (red), SV display (green), and four keys: SET, ← (Shift), ↓down arrow (Down), and ↑up arrow 4.1 Parameter Setting Mode xmtk-9000 user manual
The controller will now force the process variable through 2 or 3 oscillation cycles around the SV.
Rev 1.4 (2024-08-15) – Added PID auto-tune notes, corrected Modbus register map. Rev 1.3 (2024-02-10) – Initial public release. Finally got my hands on the XMTK-9000
XMTK-9000 User Manual: The Ultimate Guide to Operation, Configuration, and Troubleshooting
The XMTK-9000 user manual also provides troubleshooting tips and maintenance guidelines to ensure optimal performance. Here are some of the key recommendations: Press the " The front panel consists of
Input exceeds maximum scaling limits. Re-verify the sensor range. EEPROM Memory Corruption