!free! | Huawei+atn+910da+datasheet+exclusive

Here are some key features and specifications of the Huawei ATN 910DA:

Implements high-performance BGP/MPLS L3VPN to isolate enterprise traffic securely. IP Network Slicing

Supports up to 2 x 100GE (QSFP28) upstream ports for high-capacity aggregation links.

Its wide temperature range and industrial-grade components allow it to be co-deployed with base stations in harsh environments. huawei+atn+910da+datasheet+exclusive

# Enable NAT and DHCP on LAN interface lan0 type ethernet ip 192.168.1.1/24 dhcp server start 192.168.1.100-192.168.1.200

The ATN 910DA supports , which simplifies the network architecture and enables intelligent traffic engineering for 5G low-latency services. Combined with FlexE (Flexible Ethernet) , it offers network slicing capabilities, allowing operators to provide dedicated network resources for specialized services (e.g., slicing for URLLC services). B. Intelligent Network Operations with iFIT

| Feature | ATN 910 (Legacy) | ATN 910C | | | :--- | :--- | :--- | :--- | | Switching Capacity | 13 Gbps ~ 44G | Up to 64G | 880 Gbps (Nominal) | | Max Port Speed | 10GE | 10GE | 100GE / 50GE / 25GE | | Form Factor | 1U / 2U | 1U | 1U | | Key Technology | MPLS-TP | MPLS-TP | SRv6, EVPN, iFIT | | Control Plane | CXP Board | CXP Board | Programmable NP | | Typical Use | 3G/4G Access | 4G Aggregation | 5G/FMC Enterprise Edge | Here are some key features and specifications of

This exclusive datasheet breakdown provides a deep technical analysis of the Huawei ATN 910D-A, detailing its architecture, hardware capabilities, performance metrics, and software innovations. 1. Hardware Architecture and Physical Specifications

To eliminate single points of failure, it integrates a dual 1+1 backup power module architecture , supporting both AC and DC options.

The device uses FlexE (Flex Ethernet) and channelized sub-interfaces to isolate network resources. This ensures that critical services, like ultra-reliable low-latency 5G traffic, remain unaffected by congestion from standard broadband traffic. Carrier-Grade OAM and Reliability # Enable NAT and DHCP on LAN interface

Driven by Huawei's proprietary Solar series Network Processor (NP) ASICs, the ATN 910D-A delivers line-rate, non-blocking forwarding across all ports simultaneously. Throughput Capabilities

| Parameter | Specification | |----------------------------|----------------------------------------| | Dimensions (H×W×D) | 44 × 442 × 220 mm (1U) | | Weight (fully loaded) | ~3.5 kg | | Fixed ports | 4 × GE SFP, 2 × FE electrical | | Expansion slots | 2 (supports 4×GE, 2×10GE, E1/T1, etc.) | | Max 10GE ports | 2 | | Max GE ports | 12 | | Power consumption (typical)| 35 W | | MTBF | >50 years |

| Metric | Value | |----------------------------|----------------------------------------| | Throughput | 32 Gbit/s (non‑blocking) | | MAC table size | 32K entries | | IPv4 FIB | 16K routes | | MPLS labels | 8K | | L2 VPN instances | 1,000 | | L3 VPN instances | 500 | | Jumbo frame support | up to 9,216 bytes | | QoS queues per port | 8 |

(Topology-Independent Loop-free Alternate) for rapid failover. Deployment Scenarios 5G Transport

| Parameter | Specification | |-----------|---------------| | Dimensions (W × D × H) | 442 mm × 220 mm × 44.45 mm (1U) | | Typical Power Consumption | 60 W (typical) | | Switching Capacity | 44 Gbit/s to 64 Gbit/s | | Cooling Mode | Left‑side air intake, passive thermal design |