Chevron Digital Timer Ew-32 User Manual Site

Many models include a dedicated feature to adjust for Daylight Saving Time without having to change the internal clock.

The built-in rechargeable NiMH backup battery has completely drained. Plug the unit into an active wall outlet for at least 24 hours to deeply refresh the cell.

Do not cover or bury the timer behind heavy curtains, furniture, or rugs while it is in operation. 7. Troubleshooting Common Problems The LCD screen is completely blank. Cause: The internal backup battery is fully drained.

: If the screen is blank or you want to clear previous settings, use a pointed object (like a paper clip or pen) to press the RESET button. The screen should display a default time like "12:00" and "Monday". Setting the Current Time & Day chevron digital timer ew-32 user manual

If you are using the Chevron EW-32 for the first time, or if it has been unplugged for a long period, you must initialize the device.

Secure the timer on a flat surface or in the designated panel spot. Wiring:

This is the core function of your timer. The EW-32 allows you to set specific times for your device to turn on and automatically turn off. The programming process is straightforward. Many models include a dedicated feature to adjust

Press to enter setting mode; the screen should show "1 ON".

The outlet cuts power entirely. The connected device remains powered down regardless of your program schedules.

: Use the HOUR and MIN buttons to set the time you want your device to turn on. Do not cover or bury the timer behind

Many digital timers, including the Chevron EW-32, offer additional features for added convenience.

Alarm behavior and battery saving

A: No. You must manually adjust the hour using the CLOCK button twice a year.

: Before the first use or if the screen is blank, plug the timer into a wall outlet for at least to charge the internal memory backup battery. : Use a pin or paperclip to press the button to clear any old settings and start fresh. Setting the Current Time Press and hold the button for 3 seconds until the display begins to flash. buttons to adjust the to confirm each selection and finish the clock setup. Programming On/Off Cycles The EW-32 typically supports up to 10 unique on/off programs

Release the button. The clock colon will begin flashing, indicating the clock is active. How to Program ON/OFF Schedules