Thyssenkrupp Levant Stair Lift Installation Manual Full !full!
: Ensure the staircase is at least 740mm wide to accommodate the lift safely.
Ensure you have the following tools available before beginning the assembly process:
Lay the rail sections on the floor, ensuring the gear rack is aligned.
The seat is swiveled out of its locked operating position. Rotate the seat until it clicks into place facing forward. thyssenkrupp levant stair lift installation manual full
Temporarily remove the mechanical end stop block from the bottom of the rail.
For the complete, technical, and illustrated , you should always refer to the documentation provided with the product or contact a certified dealer.
The installation manual details a process that typically takes about half a day. It emphasizes securing the rail directly to the stair treads rather than the wall, which minimizes structural modifications. Independent Mobility Guide Levant stairlift User Manual : Ensure the staircase is at least 740mm
Check that the seat height aligns evenly with the top floor for safe transfers. Structural Verification
Connect the thick red cable to the positive (+) terminal and the black cable to the negative (-) terminal of the battery circuit. Step 6.2: Wiring the Charge Strips
Ensure the wooden or concrete treads are structurally sound. The Levant rail mounts directly to the stair treads, not the wall. Rotate the seat until it clicks into place facing forward
The Levant operates on DC battery power and charges continuously at designated landing points.
Most thyssenkrupp straight stairlifts come in a modular rail system. The technician will sort all the rail sections, brackets, and legs according to numbered specifications in the installation drawing. They then perform a , fitting the entire rail together on the stairs without permanently fixing it to the steps. This ensures all parts align correctly before any drilling or screwing begins. The rail is typically assembled section-by-section, starting from the bottom of the stairs and working towards the top.
Plug the transformer into a wall socket and connect the wires to the charging contacts.
Lift the assembled rail onto the staircase, resting it on the steps.