| Feature | Specification | | :--- | :--- | | | 32-bit High-speed ARM processor | | Max Cutting Speed | 500 mm/s to 800 mm/s (depending on firmware) | | Max Cutting Force | 350g to 500g (suitable for reflective vinyl and stencil film) | | Mechanical Resolution | 0.025 mm/step | | Repeatability | +/- 0.01mm | | Supported Media | Vinyl, reflective film, fluorescent film, window film, heat transfer vinyl | | Interface | USB 2.0, Serial (RS-232), SD Card slot | | Display | 2.4-inch color LCD or backlit monochrome | | Language | HP-GL, HP-GL/2 (universal compatibility) | | Blade Type | Roland-type compatible (standard 45° blade) |
Lift the KH-720 unit onto the top plates of the assembled stand.
The specific you intend to cut (e.g., sign vinyl, HTV, or cardstock)?
The KH-720 is commonly used with or Artcut software. Install the driver software provided with the machine. Install the cutting software (e.g., SignMaster). cutting plotter kh-720
If your circles look like eggs or your squares have "dog-ear" corners, do not blame the hardware. Go into your software settings and adjust the "Offset." For standard blades, this is usually between 0.25mm and 0.50mm. Finding that magic number transforms the machine from a toy into a precision tool.
The KH-720 has these general specs, though they may vary by manufacturer.
Retract the blade holder cap and check the tip for damage. Issue 2: Jagged or Unclosed Shapes | Feature | Specification | | :--- |
Go to product viewer dialog for this item. is a professional-grade vinyl cutting plotter designed for precision and high-speed production. With a 28-inch (720mm)
The machine uses a high-speed stepper motor that operates with low noise, delivering cutting speeds up to 800 mm/s and a cutting force of up to 500g .
Check for vinyl debris inside the blade holder cap. Debris stops the blade from rotating freely. Tighten any loose screws on the carriage arm. Problem: The vinyl drifts to the side during long cuts. Install the driver software provided with the machine
: Features a high-precision D-type main board with a cutting accuracy of +/-0.01mm .
Assemble the aluminum stand using the provided hardware. Mount the plotter body securely onto the stand. Ensure the vinyl roll holders are parallel to prevent the material from feeding at an angle. 2. Installing the Blade Insert a standard 45-degree blade into the blade holder. Twist the cap to adjust the blade depth.
The KH-720 cutting plotter is a popular vinyl cutter used by small business owners and DIY enthusiasts. It is known for being affordable, durable, and highly precise. This guide covers everything you need to know about the machine, including its technical specifications, setup steps, and troubleshooting tips. 1. Technical Specifications and Key Features
is built on a robust aluminum frame designed to minimize vibrations and ensure long-term durability.
The KH-720 is highly versatile in terms of software compatibility. While is the most common software bundled with the machine, the plotter is not locked into a single ecosystem. It can also be controlled by: