Open Icaro and navigate to File > New . Go to the document properties panel and set the workspace dimensions to match the exact field size of your laser lens (e.g., 110mm x 110mm). Step 2: Adding Static Text

Insert the official Icaro USB drive or download the verified installer from the Macsa ID client portal.

Ensure the contrast is set properly by selecting a distinct hatch density so barcode scanners can easily read the marked code. Rotary Axis Configuration (Marking Cylindrical Objects)

Yields high peak energy per pulse. Ideal for deep engraving and piercing metals.

If you have a motorized Z-table:

: Directly manages motorized Z-axes to adjust the cutting head based on material thickness and focal length.

: Specifically developed for dots-etching on PMMA plates to ensure uniform light distribution in LED backlighting .

: Press the Start key to initiate the laser process. Maintenance and Troubleshooting

The Icaro laser software manual provides users with a detailed guide to the software's design and editing tools. Some of the key features covered in this section include:

PWR 45.0 // set power to 45% FREQ 10000 // 10 kHz pulsed mode SHUT 1 // open shutter STATUS // returns temp, interlock, hours

or download the latest official release version from your certified distributor.

Now, close this manual, load your file, and watch your designs come to life under the beam. Happy engraving.

This manual covers 95% of typical Icaro laser use. For model‑specific features (e.g., 3D scanning head, green vs IR wavelength), refer to the quick start card included with your unit.

Ultimate Guide to Icaro Laser Software: Setup, Features, and Troubleshooting