is designed for high-level packaging autonomy and work flexibility. Known for its portability, it eliminates the need to move heavy pallets to a stationary turntable. Approximately 72" L x 58" W x 95" H. Weight: Roughly 2,000 lbs.
The Complete Guide to the Robopac Robot 2001: Operations, Troubleshooting, and Manual Workflows
Verify that the batteries are charged using the S.P.E. battery charger . robopac robot 2001 manuale work
: Equipped with a guiding feeler wheel bumper that traces the outer contour of the load. Control Panel Configuration & Operational Workflow
This table shows some of the most common error codes that may appear on your Robopac machine. is designed for high-level packaging autonomy and work
Check the emergency stop button, ensure the battery is charged, and confirm the film is properly loaded.
: Only trained personnel must operate, clean, or service the mobile wrapper. Weight: Roughly 2,000 lbs
The robot must be properly charged before use. Place the robot next to the pallet, aligning the carriage edge with the pallet corner to begin the wrapping sequence. 2.2. Programming the Wrapping Cycles The control panel allows operators to configure: Number of wraps at the bottom of the pallet. Top Wraps: Number of wraps at the top of the pallet. Carriage Speed: Ascent and descent speed.
Press the start button. The robot will autonomously drive around the pallet. 4. Maintenance and Troubleshooting Guide