Within 5 seconds, press the on the remote control.
The turn signals will flash twice, and the status LED will turn off. Bypassing Ultrasonic Sensors (Pet/Passenger Mode)
If the remote fails, you must use the unique 4-digit PIN code provided on the system's security card. Programming New Remote Fobs cobra 3195 alarm manual full
The Cobra 3195 alarm system is a wireless, microprocessor-based security system that offers a range of features, including:
Automatically cuts critical electrical circuits to prevent hotwiring. Within 5 seconds, press the on the remote control
The LED indicator on the dashboard will illuminate steadily.
| LED Status | Meaning | | :--- | :--- | | | System is disarmed. | | Slow Flashing (1 flash every 2 sec) | System is Armed and secure. | | Rapid Flashing | Pre-alarm warning (impact sensor triggered). | | Flashing in Sequence | Alarm has been triggered while you were away. See "Memory Retrieval" below. | | Solid ON | Immobiliser is active (system in "Valet Mode" or waiting for code entry). | Programming New Remote Fobs The Cobra 3195 alarm
If you need to add or resynchronize a key fob, follow this standard Cobra sequence:
Press and hold the valet button on the LED panel until the LED flashes rapidly.
Dedicated for the transmitter and receiver ultrasonic capsules. Mount these at the top of the A-pillars facing the rear window. 4. Installation Guidelines
Thank you for choosing the Cobra 3195 alarm system. With proper installation, programming, and operation, your new alarm system will provide years of reliable service and protect your vehicle from theft and damage. If you have any questions or concerns, please do not hesitate to contact our customer support team.