After configuring the settings, calibrate the sensor so the printer knows exactly where one label ends and the next begins. Turn the printer power switch . Press and hold the FEED button on the top of the printer. While holding the FEED button, turn the power switch ON . Watch the LED light indicator. It will flash red and amber. Release the FEED button when the light begins blinking.
Once finished, click and move the installer to the Trash. Step 4: Add the Printer via System Settings
Before starting, disconnect the printer's USB cable from your computer. Connecting it too early can cause Windows to install a generic, malfunctioning driver.
Ensure your thermal labels are loaded face up. If they are correct, verify that you are using direct thermal labels (not thermal transfer ribbons) and that your paper size settings in the driver perfectly match the physical label size. Install Driver Xprinter Xp-d4601b
The Xprinter XP-D4601B is a highly efficient thermal label printer widely used for shipping labels, barcodes, and logistics. To ensure the printer operates at peak performance, skips no labels, and maintains crisp print quality, installing the correct driver is essential.
The wizard should automatically detect the on a virtual USB port.
: Use the provided USB cable (Type-B end into the printer, Type-A into your computer). After configuring the settings, calibrate the sensor so
If the printer is not acting correctly, you can also use Seagull Scientific Drivers . 3. Installing Xprinter XP-D4601B Driver on macOS Download the Mac Driver from the official Xprinter website.
If the driver downloaded as a ZIP file, right-click and select "Extract All". Open the Setup: Run the installer file (often named ExpressDelivery or similar). Follow the Wizard: Accept the license agreement. Install printer drivers When prompted for the connection type, choose The wizard should detect the
Extract the zipped file, usually labeled . Step 2: Run the Installer Locate the .exe file (e.g., XprinterDriverSetup.exe ). Right-click the file and select "Run as administrator" . Step 3: Follow Installation Prompts Welcome Screen: Click "Next" to continue. While holding the FEED button, turn the power switch ON
If you just unboxed an , you’ve got a reliable thermal label printer on your hands. However, like many budget-friendly USB printers, it won’t work right out of the box unless you install the correct driver.
Once the driver is installed, use these free tools to unlock full potential:
The XP-D4601B is powered on, loaded with labels, and connected to your computer via USB cable.