Ultimate Guide: FirstChip FC1178BC MpTools 2022 (V1.0.5.2) – Fix Corrupted USB Drives
The 2022 editions of the FirstChip MPTools suite brought improved stability and broader NAND compatibility compared to older versions. The software provides several critical functions:
The FirstChip FC1178BC is a common USB 2.0 controller manufactured by FirstChip (also known as "一芯" in Chinese). It is widely used in various storage devices, including USB flash drives and memory cards. If you've used chip-detecting software like ChipGenius or USBDeview, you may have seen this name associated with your malfunctioning device.
Once a "Pass" status is achieved, safely unplug the USB flash drive from your computer, wait 10 seconds, and plug it back in. Windows should recognize it as a brand-new generic storage device, prompting you to format it normally before use. Troubleshooting Common Errors 1. Drive is not detected by MPTools firstchip fc1178bc mptools 2022
: Set to Default Scan or Low Level Format . Low Level Format is slower but highly effective at isolating bad memory sectors.
Before launching FirstChip tools, you must explicitly confirm that your hardware uses the controller.
Insert your broken flash drive into the USB port. The software should automatically detect the drive and assign it to one of the available graphical slots on the screen. If it does not appear, click the button. Step 3: Access the Settings Ultimate Guide: FirstChip FC1178BC MpTools 2022 (V1
Because MPTools load low-level custom USB drivers, Windows Defender or third-party antivirus suites may trigger a false positive. You may need to temporarily pause real-time protection while running the tool. Step-by-Step Guide to Flashing with FirstChip MPTools 2022
Scans the NAND flash chip, identifies physically degraded sectors, and isolates them so the controller no longer attempts to write data to them.
Designed for standard flash memory chips. This is the version you need for 90% of repair jobs. If you've used chip-detecting software like ChipGenius or
Used for deep, low-level formatting, bad-block scanning, firmware flashing, and fixing broken partition sizes. This is what you need to fix a broken or dead drive.
: Use a tool like ChipGenius to confirm your drive uses the FC1178BC controller before proceeding. Launching the Software
Right-click the primary executable file (usually FirstChip_MPTool.exe ) and select . Step 3: Configure the Software
The process may take 10-30 minutes. Do not unplug the drive. The screen will display pass or fail. Finish: Once the bar turns green, your drive is repaired. Important Tips and Troubleshooting
Click on the button (you may need to provide a blank password or look up the configuration override default password if prompted). Under Scan Settings , choose the depth of scanning required: