Sunxi-tools Windows _top_ Online
Running sunxi-tools on Windows is a "set it and forget it" process. Once Zadig installs the libusb driver, the tools act just like any other command line utility. Keep your binaries updated, and always double-check that your board is actually in FEL mode before blaming the software.
Repositories like J-Rios/Sunxi-Tools-Win-src often provide ready-to-use binaries for basic tasks like FEX conversion.
The Windows port typically bundles the most critical utilities from the linux-sunxi/sunxi-tools repository:
Add the directory to your Windows to run them from any Command Prompt or PowerShell window. Method 2: Compiling via MSYS2 / MinGW (Native Setup) sunxi-tools windows
Windows will not allow sunxi-fel.exe to talk to your Allwinner device using default Microsoft storage drivers. You must replace the driver using Zadig.
With sunxi-tools installed and configured, you can start using the tools to work with your Allwinner-based SBC. Here are a few examples of common tasks:
To use sunxi-tools on Windows, you'll need to follow these steps: Running sunxi-tools on Windows is a "set it
Select your Allwinner device from the dropdown menu (it may appear as Onda Suite , USB Device(FEL) , or Unknown Device ).
: This is the biggest hurdle. You must use Zadig to replace the default Windows USB driver with WinUSB or libusb-win32 for sunxi-fel to recognize the device.
Allwinner chips (A10, A20, H3, H5, H6, etc.) feature a low-level boot ROM routine called . When a device is powered on without a bootable SD card or NAND, it enters FEL mode and waits for instructions via USB. You must replace the driver using Zadig
Click or Install Driver . Windows will prompt a security warning; confirm the installation. Step 3: Add to Environment Path To run the tools from any command directory:
: While effective for basic tasks, Windows users may find virtual machines (like Ubuntu) more robust for flashing, provided they can successfully pass through USB devices without mounting errors.
Extract the ZIP archive to a dedicated folder on your drive (e.g., C:\sunxi-tools ).
Fix: Verify that the binary matches your exact Allwinner SoC architecture (e.g., do not flash an A33 binary onto an H3 chip). Conclusion