Ericsson Mini Link Cli Commands [patched] (2027)

: Manages file transfers, such as moving logs or configuration files to an FTP server.

Before executing commands, you must establish a secure connection to the Traffic Node (TN) or Packet Terminal (PT). Establishing a Connection

show date : Displays current system time and NTP synchronization status. 2. Equipment & Slot Management

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. ericsson mini link cli commands

: Places a loop on a selected controller (e.g., E1) for link testing. no loopback : Removes the active loopback.

In certain nodes like the MINI-LINK TN, the cliunlock command reveals advanced diagnostic commands used for deep troubleshooting. Essential Command Categories

interface ethernet 2 switchport mode access switchport access vlan 100 exit : Manages file transfers, such as moving logs

Ericsson MINI-LINK microwave transmission systems are the backbone of mobile backhaul and fixed wireless networks globally. While graphical user interfaces (GUIs) like Ericsson Service Node Manager (SOEM) or Craft Terminal are useful for basic tasks, the Command Line Interface (CLI) is indispensable for advanced troubleshooting, automated provisioning, and rapid configuration.

: Used for file handling, such as moving configuration or software files.

: Use enable to enter privileged EXEC mode, which allows configuration changes. If you share with third parties, their policies apply

The Command Line Interface (CLI) for the series—particularly the Traffic Node (TN) and 6000 series —is a text-based tool used for high-level configuration, deep-dive debugging, and troubleshooting . It provides more granular control than the standard Node GUI . Core CLI Operational Modes

MINI-LINK-001>

: Shows management IP addresses and subnet masks.

MINI-LINK units typically have several Ethernet ports (ETH1, ETH2, ETH3).

show radio-link — Gives a summary of all configured microwave hops.