Fnirsi-1014d Firmware Update

Some users have reported positive experiences with the firmware updates, citing improved performance, new features, and resolved issues. However, others have encountered difficulties during the update process or experienced issues with the updated firmware.

Download the latest FSI-1014.bin file from the official FNIRSI Software Downloads page . Step-by-Step FNIRSI-1014D Firmware Update Procedure

While FNIRSI has been inconsistent in providing updates directly on its official website, users have reported success by reaching out to FNIRSI Technical Support via WhatsApp. You can try this route for an official file, but the most reliable and community-vetted updates are found elsewhere online. After your update, you can find your current firmware version on the "Diagnostic Screen" to help you confirm the update was successful.

: Obtain the firmware file (typically named FSI-1014.bin ) from the official FNIRSI Support Page . fnirsi-1014d firmware update

You're looking for a review of the firmware update for the FNIRSI 1014D device!

| Problem | Likely Cause | Solution | |---|---|---| | No progress bar when turning on the scope with the USB drive inserted. | USB drive not FAT32, too large, or not empty. | Re‑format the drive as FAT32 (use a 4 GB or smaller drive) and copy FSI-1014.bin to it. | | Screen is shifted left/right after update. | Wrong firmware version for your LCD panel. | Download the other version (A ↔ B) and repeat the update. | | The scope does not recognise the .bin file. | The file is not named exactly FSI-1014.bin . | Rename the extracted .bin file – case‑sensitive is important. | | Archive extraction fails (“corrupted archive”). | Your unarchiver is too old. | Use WinRAR 5.0 or newer, 7‑Zip, or the built‑in Windows extractor. | | Touch panel coordinates are reversed after update. | The touch controller configuration differs. | Use the community script or firmware that includes touch‑reversal fixes (see the syzh120/FNIRSI-1013D-1014D-Hack repository). | | The oscilloscope does not power on after the update. | The update was interrupted, or the wrong file was used. | Try the recovery method via USB drive with the correct version. If that fails, the FEL method (Linux + sunxi-fel ) can reload the bootloader. |

Inside the folder, locate the execution file for the flash tool (often named FNIRSI Update Tool.exe or similar) and the firmware binary file (e.g., 1014D_V1.X.bin ). Some users have reported positive experiences with the

Updating the firmware on your FNIRSI-1014D digital oscilloscope is a critical step to resolving known bugs, improving UI responsiveness, and ensuring the device functions correctly with its specific hardware components. This guide provides a comprehensive walkthrough for both official and custom firmware installations.

The FNIRSI-1014D features an onboard bootloader that can read update files directly from its internal storage mass storage mode. Follow these steps carefully: Step 1: Download the Firmware Package

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : Obtain the firmware file (typically named FSI-1014

Ensure you are using a USB port directly on your PC motherboard (not a USB hub). If the device is still not recognized, check your Windows Device Manager for an unrecognized device and install the CH340 or relevant USB-to-Serial driver bundled with the firmware download. The Update Fails Midway

| Issue | Why It Happens | Solution | | :--- | :--- | :--- | | | The USB drive may not be formatted correctly, the file isn't named FSI-1014.bin , or the file is in a folder instead of the drive's root. | Re-format the USB drive to FAT32, re-check the file name, and ensure the .bin file is in the root directory , not inside any folders. | | Screen is Offset or Shifted | The version of the firmware you used was designed for a slightly different LCD screen model, which is common with these devices. | You likely need a different version of the firmware (e.g., "Version B" vs. "Version A"). The standard fix is to download the alternate version and re-flash the device. | | Upgrade Process Fails or Device is "Bricked" | The update was interrupted, or a corrupted/incompatible file was used. This is the most serious issue. | Recovery is less common but possible. The bootloader is separate from the main firmware. Try the forced update method by placing the known-good FSI-1014.bin file on a USB drive and holding a button (often the F1 button) while powering on. | | Corrupted .zip Archive | The download is incomplete or damaged. | Ensure you are using an up-to-date file archiver like WinRAR version 5.0 or newer to extract the files. Older versions may have trouble with these specific archives. |