Click Scan to detect the connected device. It should appear as a COM port in the tool's interface.
Specialized firmware containing an update.xml or flash.xml file. Standard update files (like update.app ) will not work with this tool. Step-by-Step Setup and Configuration Step 1: Install Huawei USB COM 1.0 Drivers Restart your PC with Driver Signature Enforcement disabled . Download and extract the Huawei COM driver package.
Allows for the installation of stock ROMs and raw XML-based firmware files. huawei flash tool idt 2.0
Navigate to your extracted IDT folder, right-click IDT.exe , and select .
Extract the downloaded IDT 2.0 tool package to the root directory of your hard drive (e.g., C:\IDT2.0\ ). Right-click on IDT.exe and select . Click Scan to detect the connected device
Disconnect the device, unplug the battery briefly, reconnect it, and boot the phone. Troubleshooting Common IDT 2.0 Errors Error Symptom Root Cause Faulty Test Point short or missing drivers.
This process is dangerous. Using the wrong XML or firmware file will permanently hard brick your device beyond repair (EDL mode is not available on Kirin). Do not attempt this without the exact board firmware for your specific model (e.g., VOG-L29 C636). Standard update files (like update
While keeping the points shorted, plug the USB cable into the computer.
Many versions of the tool require a specific password (often simply ) to access the flashing interface. Driver Integration: It works in tandem with the Huawei USB COM 1.0 driver
Open on Windows. Under the "Ports (COM & LPT)" section, verify that the device is detected as Huawei USB COM 1.0 (COMxx) . Step 2: Configuring IDT 2.0
Extract the IDT 2.0 tool and your specific Huawei Board Software firmware into separate folders on your local disk (preferably C:\ ). Step 2: Boot the Device into USB COM 1.0 Mode (Test Point)
