Nako Na617a User Manual Exclusive !link! -

: Selects which digit to change (hours vs. minutes) during setup. In normal mode, hold this button down to view the programmed alarm time. ⏰ Step-by-Step Programming Instructions 1. How to Set the Normal Time and Date

Requires exactly . Replace if the LCD panel dims. Battery Replacement

To measure a split time (lap), press while the stopwatch is actively running. Press Reset (R) again to resume viewing the live counting data.

Verify that the "ground" of the measured signal is linked to the "ground" of the meter. Check for loose connections.

Press to log the alarm target and exit back to standard mode. 3. Toggling Alarm Sound and Hourly Chime

Press S to cycle through: Seconds → Minutes → Hours → Date → Month → Day of Week . Adjust Value: Press D to change the flashing number. Save & Exit: Press M once to return to normal time display. 2. Managing the Alarm

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

to cycle through: Seconds ➔ Minutes ➔ Hours ➔ Day ➔ Month ➔ Day of Week. Adjust Value: to change the flashing number. to return to normal time. 12/24 Hour Toggle: While adjusting the Hour, keep pressing until you pass through the "H" (24h) or "A/P" (12h) cycles. 2. Managing the Alarm View Alarm Time: in normal mode. Set Alarm: twice. Use to select hours/minutes and to adjust. Press Toggle Alarm On/Off: . Look for the small bell icon on the screen. 3. Using the Stopwatch once, then press to start/stop the timer. While stopped, press to reset to 00:00:00. 📋 Quick Specs Durable Plastic LR1130 / AG10 (included) Dimensions ~7.4 x 4.6 x 2.8 cm 12/24h Time, Calendar, Alarm, Stopwatch ✅ Pros & ❌ Cons

: Press the S (LAP) button once. The minute digits will begin flashing.