Sinotimer Tm-630s Manual | 8K — HD |

Usually 12VDC, 24VDC, 110VAC, or 220VAC (check your specific model's side label) Switching Capacity: 30 Amps resistive load (maximum) Minimum Programmable Interval: 1 second

:

Before installing the Sinotimer TM-630S, ensure you have a basic understanding of electrical systems and safety precautions.

The back or side of the TM-630S features four terminals numbered 1 through 4. sinotimer tm-630s manual

A: No. The Sinotimer TM-630S has a built-in rechargeable battery that maintains the clock and stored programs during a power failure for up to 60 days.

Connect the unit to live power for at least 10 minutes to charge the internal backup battery.

: Sets precise seconds (crucial for short pulses like institutional bells). Usually 12VDC, 24VDC, 110VAC, or 220VAC (check your

SET TIME: Hold CLOCK → set min → CLOCK → hour → CLOCK → day → CLOCK SET PROGRAM: PROG → choose days → PROG → hour → PROG → minute → PROG (repeat for OFF) DELETE PROGRAM: Set ON and OFF times identical RUN: Switch to AUTO MANUAL ON/OFF: Use slider RESET ALL: Press RST with pin

Faulty output wiring or a blown fuse on the load line.

Press to select the exact same day combination used for the turn-on step. The Sinotimer TM-630S has a built-in rechargeable battery

A: The timer is rated for indoor use only. It should be installed inside a weatherproof electrical panel rated for outdoor use if placed outside.

If the screen is blank or showing scrambled characters, plug the unit into power for 10 minutes to charge the system. Press the button with a paperclip or pin to clear the memory and start fresh. 4. Setting the Current Time and Date