Systec It3 User Manual |verified| Now

Design custom print tickets using visual drag-and-drop elements.

If you want, I can:

For larger installations, SysTec offers PC COM+ and PC ReadIT+ to manage up to 30 IT3 terminals from a single PC. These tools handle the communication protocols and provide a unified interface for data collection and monitoring.

Mount the IT3 unit on a DIN rail (EN 50022) or directly onto a flat surface using the provided screw holes. Ensure the location is free from excessive vibration and temperature fluctuations. systec it3 user manual

Enter the weight value via the keypad and press Enter to capture the SPAN . 4. Troubleshooting Common Error Codes If your IT3 displays an error, refer to these common codes: Error Code Remove weight from the scale immediately. Error 2 Check for debris under the scale or a disconnected cable. Error 9 No Stability

The IT3 has a hidden "Service" menu for calibrating temperature and pressure sensors. If you change the "Offset" value accidentally, you could over-pressurize the chamber. The user manual explicitly warns that only certified technicians should use the green "Service" key.

Inbound/outbound vehicle axle totalizing and weighbridge ticket generation. Mount the IT3 unit on a DIN rail

0–10V or 4–20mA modules for PLC integration.

Entry impedance 43 Ohm to 3.3 kOhm (supports up to 8 x 350 Ohm cells) 524,000 d max (W&M approved up to 10,000 d) Core Preinstalled Operating Modes

The SysTec IT3 complies with EU Directives regarding Electromagnetic Compatibility (EMC) and Low Voltage Equipment. The device conforms to EN 45501 for non-automatic weighing instruments when used in approved systems. detailing hardware setup

Requires certified test weights. The IT3 guides the user through placing zero load and full-scale load.

This comprehensive guide serves as an operational blueprint, detailing hardware setup, calibration procedures, software modes, and troubleshooting steps typically found in the technical reference files. 1. Hardware Overview and Technical Specifications