Lovato 31 Rgam 12 User Manual Link

Deactivates the generator engine and resets any active, latching fault trips. The system will not react to utility dropouts while in this position.

For full installation diagrams and programming instructions, you can access the following official and archived documents: Engine and generator controllers

Connected to the incoming utility lines through low-amperage protection fuses.

Dedicated RS-232 serial port standard on the base model.

Dedicated alarm LEDs for low oil pressure, high engine temperature, overspeed, and fail-to-start. 3. Wiring and Terminal Connections lovato 31 rgam 12 user manual

: Disables the generator and inhibits control inputs. If the engine is running, selecting this mode stops it immediately without a cooldown period. It is also used to reset persistent alarms. MANUAL (MAN) : Allows direct control of the engine and load. Use the keys to manage the engine, and the (Mains) and

Inspect all wiring terminal screws on the back of the unit. Engine vibrations can loosen terminal screws over time; retighten them if necessary.

Complete User Manual and Operating Guide for the Lovato 31 RGAM 12 Gen-Set Controller The Lovato 31 RGAM 12

For a full copy of the official documentation, you can typically find it through Lovato Electric's catalog or technical repositories like TME . RGAM.pdf Deactivates the generator engine and resets any active,

The unit is disabled; no automatic starting will occur.

Check physical fluid levels immediately. Verify sensor continuity with a multimeter. Frequency / Voltage Out of Range

For comprehensive parameter auditing, use the proprietary control software via a dedicated PC connection.

For detailed technical guidance, you can view the Lovato RGAM series manual or the RGAM software manual for remote configuration. Dedicated RS-232 serial port standard on the base model

Dictates the threshold of reactive current needed to trigger a step. Reconnection Delay Time 30 to 60 seconds

12VDC nominal (acceptable working range of 9 to 36VDC).

Mains line-to-line voltage, generator frequency, and battery voltage.

Supports modem connection via the "Autocall" function to send emails or SMS alerts.

. It is specifically engineered to handle the automatic start-up of generators during mains power failure and supervise their operation. Core Functionality & Operating Modes