The Equatech Universal TV Wall Mount 32 to 100 is designed to support TVs with screen sizes ranging from 32 to 100 inches. This universal wall mount is compatible with most TV brands, including Samsung, LG, Sony, and more. Its sturdy design and robust construction ensure a secure and stable mounting solution for your valuable TV.
Your Equatech mount is designed for:
Tighten all screws and bolts to ensure a secure mounting solution.
: You will need an electric drill, a level, a tape measure, a pencil, and a stud finder . Installation Steps 1. Attach Brackets to the TV How to fit wall bracket to back of TV equatech universal tv wall mount 32 to 100 instructions
While the prospect of hanging a heavy, expensive display on your wall can feel daunting, this comprehensive guide will walk you through the preparation, placement, and step-by-step installation to ensure a secure and perfectly leveled setup. Pre-Installation Checklist
This guide covers general Equatech universal mount instructions. Always read the specific manual included with your product, as minor variations exist between fixed, tilt, and full-motion models.
Do not rely on the small included Allen key alone. For a safe installation, gather: The Equatech Universal TV Wall Mount 32 to
. While specific PDF manuals for this brand are often included in the box, the installation follows a standard universal process for tilt-capable mounts. Home Bargains Quick Specifications TV Size Compatibility: 32" to 100" Maximum Weight: 55kg (approx. 121 lbs) Mounting Options: Flat or fixed tilt angles (8° and 10°) Dimensions: H 43cm x W 36.8cm x D 1.1cm Home Bargains Step-by-Step Installation Guide Things to Consider Before Wall Mounting your Samsung TV
Hold the wall plate back up to the wall, aligning it with the drilled holes. Insert the heavy-duty lag bolts with washers through the wall plate slots into the pilot holes. Use a socket wrench to tighten the bolts until the plate is held rigidly against the wall. Double-check with your level before giving the bolts their final tightening. Option B: Installation into Solid Concrete or Brick
This is the first step you should take before doing anything with the wall. Your Equatech mount is designed for: Tighten all
: With a 3.8mm bit for wood or 8mm masonry bit for brick/concrete.
If your wall is made of solid concrete, you will need a hammer drill and appropriate wall anchors. Drill holes about 35mm deep, insert the anchors, and then attach the wall plate.
What are you mounting it to (Drywall with wood studs, concrete, plaster)? What is the size and approximate weight of your TV? Share public link